(0 items-$0.00)

Eurotour 2013 Video Series – Chapter 1: Almabtrieb

In this first episode of the Seismic Eurotour Video Series, Seismic Team riders Rafa Garrido, Javier Tato, and Aleix Gallimo drove from Castell de Castells in Valencia (Spain) to Almabtrieb, Germany, for the first race of the 2013 Eurotour. Despite a few misadventures on the road, they managed to get to the race on time – but not without first learning a lesson in auto mechanics!

Follow the next episodes in the Seismic Eurotour Video Series on the Seismic Youtube Channel.

Grizzly Conditions with Dre Nubine

Ever complained about the snow harshing your gnar? Snow doesn’t phase Dre “Grizzly” Nubine one bit as he tears down a Colorado mountain pass at speeds in excess of 50mph — with a little help from Seismic’s top-secret new speed/freeride urethane formula. Bright white to match the weather conditions!

Mischo Erban “Tooth and Nail: Smiling!” 2011

Mischo Erban has been pioneering longboarding since man of you were in grade school! This guy is a true racer and has shown it with countless podiums on the world circuit and even a few titles worthy of boasting. This is a flashback to his 2011 season where he won the IGSA World Championship Title in Brazil.

From MIscho…

“Still hanging in by tooth and nail the, 2011 season was another to remember! I was becoming more tuned into my skateboard setup and confidence and perseverance paid off with the World Champion Title being seized on my most favorite track in Teutonia, Brazil!
Big Thanks to Fred Baumann, Ronin Trucks, GMR Skateboards, Dan Gesmer at Seismic, Xtreme Board Shop Glendora, Knucklenuts and Crocan for the video edit!”

mischo.com

Edit By: Marek “Crocan” Vanourek

Velefique Freeride 2012

Check out Javier Tato’s sick edit from the Velefique Freeride 2012!
Seismic team rider Javier Tato recently attended a downhill gathering in Velefique, a small town in the southern Spanish province of Almeria. Six kilometers (3.7 miles) of smooth asphalt, technical corners, and fast straights made for an amazing course!

Full raw run: http://www.youtube.com/watch?v=cwMxX7hWiow

Artist/Song: Kind Dub – Atlanta braves VS Waka Flocka VS Ludacris Remix

Gear:
73mm Speedvents (elixir formula) and 69mm Hotspot 78a (blackops formula)
Tekton Bearings ABEC7

Ultraskate 2013, Exclusive Interview with Andrew Andras

Not only did this guy help host the event, but he also destroyed the competition! 261.8 miles in 24 hours! No easy task, but this guy pulled it off making him the new world record holder for most miles skated in 24 hours! Check out this killer interview from Seismic rider Brandon DesJarlais…

Brandon DesJarlais: To start off, what was your set up and why did you choose it? What advantage do you think this gave you over the competition?

Andy Andras: I’m a Team rider for Subsonic Skateboards so my set up of course starts of with a Subsonic GT40 longboard. It’s a drop down and drop through deck that Scott Moore- owner of Subsonic, foam cored specially for me with the Ultra-Skate in mind. This deck rides quite low and is extremely light for its size that helps tremendously in distance push and is my “go to” deck for a long distance event. I mount this GT40 with Buzzed trucks. Buzzed lightweight precisions truck keeps my set up low to the ground for a minimal step-down on my push. My Buzzed trucks get the finishing touch of Riptide bushings, cubby’s board side and barrels roadside it give it a responsive but stable feel. I like to tie this all in with Seismic 85mm Speedvent wheels and 10mm Seismic Tekton bearings, which go together smoother than peanut butter and jelly. Seismic Speedvent have been tried and true for me in all my distance push endeavors and I find the 85mm the perfect size. 10 mm bearings is my little secret touch I use for pushing distance. I feel the sustained roll of the ceramic 10mm Tekton bearings is superb.

I have logged many miles and been in many push races with this exact set up. I believe the advantage of this set up comes not only by the science behind the light deck and trucks or great rebound of the thane on the bushing and wheels, but also in being confortable on your set up and having complete and utter confidence that what your riding works perfectly for you. It needs to feel just like an extension of your body. When you have everything dialed in like that, you just feel like you have a little edge on the rest.

Brandon: At what point was the most mentally straining part of the whole 24 hours?

Andy: Funny enough, you would think the hardest part of this race is the latter part of the 24 hours, and I definitely not saying it isn’t, but actually the biggest mistake most make is going to fast early on in the race. So a big mental part is staying on your pace earl in the race no matter how many times your completion is lapping you in the beginning. Racing at your pace and speed is a big key to success later on when the going gets tough.

Brandon: Did you ever have any doubts about achieving your goal?

Andy: 24 hours is a long time on a skateboard, and while you push for that long lots of thoughts go through your mind. You have ups and downs constantly. That’s what makes this race so hard, it’s not just physically demanding, but it tests you mentally as well, it will test your soul! You will be confronted with lots of trials and tribulations in though out the event. But staying true to the personal goal you set and keeping a persistent mentality will see you through it.

Brandon: A F***ING WORLD RECORD!… What next?? Any big plans for this season? Disneyland?

Andy: Ha-ha, Yeah I had my eye on this record for a while, I always felt I am best built for the long-haul races. I don’t have the top end speed like some of the greats in this sport, but I found that the longer the race goes the more the scales tip in my favor.

Just excited to look ahead to some of the next events this year has to offer such as the Chief Ladiga/Silver comet Sk8 Challenge. I really enjoy the company, commodore and completion the other distance skaters bring to each event. Hanging with riders form all parts of this country and other country’s is as fun as the push itself.

Brandon: Any words of advice for going the distance?

Andy: Get a solid game plan together. Training, pace, nutrition. IF you don’t have these things dialed in, a long distance competition will expose you real quick my friends.

Push, Push, Push, The Push Life.

Andy “La Maquina” Andras

Troy Fairbanks new incorporation to the Seismic Team!

Check out 2013 team rider, Troy Fairbanks, tearing up the streets of Lakewood, CO on Seismic 75mm Landslides (blue 83A) and Seismic 70mm Bootlegs (blue 84A).

Deck: Abomination board
Trucks: Surf Rodz

Song: Un4givable
Artist: Blackwell

Filmed: Peter Greco, Jordan Cieluch, Colton Dombroski and Kyler Sanford
Edited: Troy Fairbanks
Camera: Canon T2i
Lens: 18-135mm and Sigma 10-20 and Opteka Slider

Other Sponsors: Riptide, Abomination and BOARDlife

Seismic goes to Japan with Skateventure

Skateventure is about having fun, meeting great people and living crazy experiences. These guys travel country to country with just their backpacks on, pushing and searching out new cultures and new spots, skating the world, one country at a time. As they explain on their website: “Skateventure was created out of the love of longboarding and a passion for adventure travel. By embarking on our journey, we hope to inspire people from all over the globe to chase their dreams and never let anything stand in their way.”

This project started on January 2011 in Northern Thailand and has already visited countries like Malaysia, Singapore, Japan, Peru and Chile.

Troy is one of the guys from Skateventure who just recently came back to his natal New Zeland from Japan in one piece.

He skated 3000km self supported from Wakkanai to Nagasaki for the benefit of the tsunami relief fund.
We want to share with you the letter he sent us recounting his adventure:
Hello Dan, 
Just an e-mail to thank you for sponsoring me on my Journey across Japan. I had an amazing time and raised some money and awareness for the Tsunami relief fund.
 
I’m back in one piece in New Zealand now, but I’m still buzzing from my adventure. It was a very moving journey. I arrived into Japan with massive culture shock, I couldn’t speak or read and everybody was so busy, it was like I didn’t exist. My first trip through the subway was another adventure all together.

I hung out with Rob Thomson in Northern Japan for a day and then began my skate south. I camped in the funniest places, In Sapporo I camped in the equivalent of central park New York. The police had no clue what I was up to and I couldn’t speak Japanese so they let me get away with everything. I slept by lakes, rivers, on mountains, abandoned warehouses, toilets, couch surfed , but spent most of the time getting invited back to locals houses.

One day I was exhausted after 13km on the road, I sat down at a tourist stop and bought a coffee. My body ached, my energy levels were lower than Antarctica. A guy named Yoshi came over to me, introduced himself and had a yarn. He was a soba-noodle technician and living legend. I ended up going back to his house having soo much delicious food, chilling at a local hot spring, visiting a samurai temple and drinking many different kinds of sake. This kind of thing happened every second night or so. It’s awesome – usually Japanese people will not invite people into their houses, not even friends. But as I was doing something so crazy and awesome, they broke all the rules. Stoke is a universal language.

From there I was always up to fun and mischief , unsuccessfully camping in a bear infested reserve, skating down Mt. Fuji, eating sashimi and kobe beef, winning karaoke battles, arm wrestling black belt karate champion (and winning) and getting invited as guest of honor to enkais (partys).

What an adventure, I have certainly taken away something special from this one !

  
Cheers,
 
Troy
This is certainly an inspiring project, follow their adventures on their website or on their Facebook page!

Brandon Desjarlais on new 73mm Elixir Speed Vents

Check out new team rider, Brandon DesJarlais, trying out 73mm Elixir Speed Vents and Ceramic Tektons for the first time on the damp streets of Salem, Oregon.

Artist: Kind Dub
Song: Good Morning Sexy
http://soundcloud.com/kinddub/

Javier Tato: Seismic Flow Rider Video

Seismic is stoked to release the first YouTube clip starring our new flow rider / videographer extraordinaire, Javier Tato of Madrid, Spain!

“The blue Bootlegs are the best freeride wheels I’ve ever ridden.  They have a great slide, and they’re REALLY resistant to flat-spotting.

The red Bootlegs are a bit more grippy.  But since they’re softer, they leave AWESOME red ‘thane lines on the asphalt.” – Javier Tato

“Longest one wheel manual on a skateboard” by James Soloday

Tomorrow, Oct. Friday 18, Blue Sky Longboards will be holding a push race on the streets of New Jersey, the Blue Sky Mile Challenge.

This is the first year that this event is happening and the guys organizing it have been trying their best to make it one of a kind for a couple different reasons:

1. A bracket will be used to place the fastest skaters together in one final heat.
2. The prize purse will be split evenly between the men and women.
3. Great for spectators!  And, the racers who didn’t make the finals will get to see the most exciting part of the event – the first place finish!

The biggest and most exciting difference at this event is the racing format.  The day will begin with practice and qualifying.  During this time racers are free to skate as much as you like.  Once you are ready to qualify (you only get one, so be ready) you will collect your timing chip, skate a mile as fast as you can, then return the timing chip to the finish to get your time.  Qualifying times will be available in real time on a monitor in the in field.

You can find more information about it here: Blue Sky Mile Challenge . There is no registration day and the registration closes toonight at midnight. You can register here:

Blue Sky Mile Challenge Poster
Blue Sky Mile Challenge Poster

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Same day, same event, James Soladay will attempt the Guiness World RecordLongest one wheel manual on a skateboard“. The current for the longest one wheel manual (wheelie) on skateboard on flat surface is 68.54 m (224 ft 10 in) and was achieved by Stefan Akesson (Sweden) at the Gallerian Shopping Centre, Stockholm, Sweden, on 2 November 2007.

James will be riding on Seismic Wheels and Seismic Bearings on this attempt to break the Guiness Workd record. Here you can check a couple of videos of him doing a manual and one wheel manual, enjoy and good luck James!!

Seismic Skate: BBDH 2012 VIDEO!

We went to BBDH two weeks ago. We had a lot of fun and we are glad to see how much is growing year after year. We love to see big events like this in Colorado. We took some pictures and made a video. Check it out!!

Brian Lugbill - BBDH 2012
Brian Lugbill – BBDH 2012

 

 

BBDH 2012
BBDH 2012

Check out more images of BBDH 2012 on our Seismic Skate Facebook page! If you participated and you can’t find a picture of yourself, write us a message because we might have a picture of you!

Check out this gnarlylicious video of Buffalo Bill Downhill 2012!

BBDH Bloodspill 2012 from nachomama on Vimeo.

Buffalo Bill Downhill: BBDH 2012

The Buffalo Bill Downhill Longboard Race returns to Lookout Mountain in Golden, CO this Saturday and Sunday, September 29-30, 2012.

Buffalo Bill Downhill 2012
Buffalo Bill Downhill 2012

 

 

 

 

 

 

 

 

 

 

Four of our Colorado team riders will be participating this weekend and we want to share their set ups, tips and expectations for this race. Even though it’s their first time to race at BBDH, it’s definitely not their first time on this racecourse. They know Look Out Mountain like the back of their hands:

Dre Nubine
Dre Nubine

Yo. I’m Dre Grizzly, I think. I’m a RADo rider and like all RADo riders. Around this time, I’m getting prepped and ready for BBDH. My set up consists of 76mm 80a Hotspots, Landyatchz 9two5, and 45° Grizzly precision trucks. With this being my first BBDH, I’m rocking this set up because it’s comfortable and I know the course like the back of my hand. I’m rocking the 76mm 80a Hotspots for simply roll speed, grip and slide. If you’ve ever been on a set Hotspots (which I’m sure you have), you know that these three characteristics are all packed into this wheel. The course isn’t super hard. A few fast turns, a few hairpins, speeds range from 40-45. ADVICE FOR NEW RIDERS: KICK OUT AHEAD OF COOP AND STAY AHEAD OF COOP!!! Joking. Coop’s a rad guy so make sure you introduce yourself to him. Have fun and kick it pagan-style for a few days.

Brian Lugbill
Brian Lugbill

Brian Lugbill from Seismic here. I’m rocking a 39″ proto Seismic single-kick deck on 180mm Gunmetal trucks with Seismic Speed Vents 73mm Red 81A (Elixir Freeride Formula) for the technical course. BBDH is a truly classic hill that is long and technical enough to allow for passes to be made on the way to the bottom. My only tip would be to have fun, and stay alert in the heavy packs that are sure to come on freeride runs.

Colorado Riders: Devon Reece and Shaquille James
Colorado Riders: Devon Reece and Shaquille James

Captain Reece here. For my first experience racing Buffalo Bill Downhill Bloodspill this year I’m going to be rocking blue 77mm/80a Speed Vents. The Buffalo Bill course is a hometown favorite, and the top roll speed capabilities will be awesome for the first half of the track, which includes a couple easy corners amongst some straightaways. While super fun, it isn’t the fastest hill around, so I have a feeling that bigger wheel speed will help quite a bit. The second half of the course is nice and technical with four hairpins. The 80a durometer breaks into a sweet, controllable drift after a couple of break-in slides, and the EC core utilized in these wheels will offer a quick acceleration coming out of corners. The 77mm Speed Vents are going to feel sick!!!

 

Shaq Daddy Shredding
Shaq Daddy Shredding

The name is Shaquille, but you can call me Shaq Daddy;) This will be my first time racing and I’ll be rocking some 76mm blue Hotspots, Tekton Bearings, Arbor 38 Vugenhauen, Ronin Trucks and a really cool foot stop that my friend made for me. I dig the 76mm Hotspots because they are fast, grippy and have a very nice slide. Plus for a bigger wheel they have awesome exit speed out of Colorado styled hairpins. BBDH is a dope course that brings a little of everything to the table. Skate fast, skate safe.

BBDH 2012 SCHEDULE:

Saturday, September 29, 2012

7:00 – 7:30 Volunteers Meetings (Staging Area)
7:30 – 3:00 Open Practice (Vols & Racers)
3:00 – 3:30 Grudge Matgch Helicopter Redeption Finals
3:30 – 6:00 Open Practice

Sunday, September 30, 2012

7:00 – 7:30 Vol Meetings (Staging Area)
7:30 – 9:00 Open Practice
9:00           RACING BEGINS

* Awards on Hill after the Racing

ADDITIONAL INFO:

– All Racers, spectators and volunteers access hill from I-70 Exit 256
– All parking along road south of actual closure
– Be prepared to walk from car (bring water, food, extra clothes, etc)
– No Parking in museum Lot
– No volunteer or spectator parking inside Closure

Directions:

http://buffalobilldownhill.com/directions/

For race course information:
http://buffalobilldownhill.com/racecourse/

Lamin Cassama’s Fresh Edit – Chillin’ with the Gnar

Seismic Flow Rider Lamin Cassama laminates the narrow woodland streets of Sweden with his Red 69mm 80a Hot Spots and Blue 70mm 84a Bootlegs. With the combination of Elixir™ freeride urethane, Tekton bearings, and style for miles, the “Laminator” offers a new level of steeze to the sport. Enjoy the free-ride!

Grab Seismic Gear at: http://www.seismicskate.com
Watch other Seismic videos at: http://www.youtube.com/user/seismicchannel?feature=results_main

New Team Rider video from Brian Lugbill

Seismic flow rider Brian Lugbill coats the streets of Boulder, CO, with yellow 79a urethane ripped from his 75mm Landslides. From bustin’ 100ft (30m) slides to tearing 58mph (93kph) downhill, Lugbill shows just how versatile the Landslides can be. This freeriding speed demon is also rockin’ Seismic Tekton bearings and a Seismic rocker-kick topmount carbon prototype. Brand new Seismic deck line, coming soon! For more Seismic Skate videos, please check out: http://www.youtube.com/user/seismicchannel?feature=results_main

Seismic Skate: Freeriding Bootlegs

Check out Seismic flow riders meltin’ pavement all over Madrid. AND TURN YOUR EARS to the sound of “In the Whale”. The band started underground in Greeley, Colorado then moved to Denver shortly after to be a part of the growing music scene.

A little bit about the band:

“…Our music tends to explore the sleazier side of life… the creepy guy in the bar eyeballing the pretty girl, the televangelist who tells you he can save you from the lake of fire, that one uncle you have with the gun collection. We hope to convey a sort of mixture of passion, aggression, and fun with our live show, and we like to think we do a damn good job at it, thank you very much…” – In the Whale

http://www.myspace.com/songsinthewhale

Seismic Skate: Javier Tato on 75mm Landslides

Check out Team Rider Javier Tato sliding down the streets of Madrid on the 75mm Landslide wheels from Seismic. The Landslides are poured on the Elixir urethane from Seismic. The first urethane designed for modern day freeriding.

Going Downhill on Seismic Hot Spot wheels

 

Check out Team Rider Javier Tato riding Downhill on a sick Spanish Road on Seismic Hot Spot  wheels. Hot Spot are poured in Seismic’s fastest urethane formula, BlackOps formula.

Seismic Landslide Freeride Wheel Review

Check this out! Great gear review written in Australia on our 75mm Landslide Wheels:

Seismic Landslide Freeride Wheel
Seismic Landslide Freeride Wheel
The responsiveness and consistent slide blew me away, I don’t know if I’ve been out of the freeride loop or just been riding race wheels for too long, but I was so impressed with the freeride ability of these wheels straight off the shelf.

The Landslide is a very similar sized wheel to the purple Durian, that I’ve always been a fan of  but these have just a little wider contact patch. Hands down the wheels did seem to drift a little too much but I’m sure its just my technique. After a solid session behind the Hopshop, I started hitting the toe sides hard, feeling free to get it sideways knowing that it was always going to come back with no trouble. The result was my first pendy style standup toeside! Stoked on a new slide in the bag,  I got Maga to start taking photos and the ripping continued. After I threw on some Durians for a straight up comparison, the result was shocking, the Durians needed more time to work in and definitely harder to… (Read more… Seismic Landslide Freeride Wheel Review)”

Results from Morro Bay Mile Skateboard Push Race

Check out Marc Juvinall’s record setting setup for the Morro Bay Mile Skateboard Push Race! Marc bettered the previous skateboarding mile world record of 4:03 by 17 seconds, finishing with a time of 3:46.9. Here’s what he told us: “Love the Black Ops urethane, soo awesome… and the cores on the hotspots are awesome… it feels like you’re barely pushing a 65mm, but they roll farther and faster than a normal 75mm… and when you come out of a turn the thane just lifts you up and puts you back on you board :)”

Marc Juvinall's set up on Morro Bay Mile Skateboard Push Race
Marc Juvinall’s set up on Morro Bay Mile Skateboard Push Race

7th Annual Vernon Downhill IGSA North American Championships

Seismic Skate Systems will be one of the lead sponsors for the 7th Annual Vernon Downhill IGSA North American Championships!

7th Anual Vernon Downhill Poster

The 7th annual Vernon Downhill is also the IGSA North American Championships for the third consecutive year in 2011. Vernon, BC is the place to be June 11-12 to see the best downhill skateboarders in North America battling it out for the championship.

Taking place in the residential neighborhood of Middleton Mountain in Vernon, BC, the race is unique by running through a residential neighborhood. Extremely kind and co-operative residents have allowed us to have this unique experience of racing down their local streets.

Track Facts
Course Length: 1.2 km (.8 mi)
Top Speed:
Qualifying Records
Downhill Skateboard: 55.094      Kevin Riemer (2010)
Street Luge:              57.846     Kolby Parks (2010)
Classic Luge:           1:02.125   Kolby Parks (2010)Previous Winners
Downhill Skateboard Winners
2010  Kevin Riemer, CAN
2009  Mischo Erban, CAN
2008  Thomas Edstrand, CANWomen’s Downhill Skateboard Winners
2010  Brianne Davies, CAN
2009  Brianne Davies, CAN
2008  Haven Anderson, CAN

Junior 1 Downhill Skateboard Winners
2010  Quinn Dubois, CAN

Junior 2 Downhill Skateboard Winners
2010  Alex Tongue, USA
2009  Spencer Smith, USA
2008  Spencer Smith, USA

Street Luge Winners
2010  William Condon, CAN
2009  William Condon, CAN

Classic Luge Winners
2010  William Condon, CAN

More details:  www.VernonDH.com
Contact: Mischo Erban

Location:

Vernon Downhill June 11-12 2011

Seismic Skate: Team Riders Proto Testing new freeride wheels

New Freeride wheels prototypes are here!

Screen shot 2013-07-30 at 13.10.19

Check out this Rad video from Team riders Stephan Reinhardt, Mark Riley, Nick Delgado, and Nate Ryan hit the streets of Boulder, Colorado on their longboards to test the prototype Seismic 75mm double-radius wheels  in the new Seismic freeride formula. Stephan even got a chance to ride a prototype Seismic 36-inch double kick!

These wheels allow you to do really smooth and consistent slides. They are really controllable and they will easily allow you to pull out standies. They also leave thick thane lines.

These wheels are poured in Seismic’s Elixir Urethane. A formula designed specifically for modern freeride. Coming out soon, stay tunned!!!

WANT TO KNOW WHEN NEW PRODUCTS DROP?