Seismic has raised the bar on bearing tech yet again! We spent over two years nerding out with a crack team of American engineers from one of the biggest and best bearing factories in the world. We scrutinized and re-assessed every last component and design feature – and seized on every opportunity to make refinements both large and small – to fully optimize all aspects of skate bearing performance. Roll tighter, truer, faster, and smarter on FULLSPIN – the finest skate bearings in the history of skate bearings!

6-Ball, 7-Ball, & 10mm Systems • Built-In & Classic Constructions
Premium Steel & Black Ceramic Ball Options

Twelve different models – the widest range on the market – with varying feature sets to fill every possible performance need. Next-level Built-In or Classic spacing tech. Steel or Black Ceramic balls in superior Grade G10 for truer, lower-friction spin inside bearings.

Exceptionally Tight, Consistent Specs for Raceway Curvature and Ball Clearance

These parameters are extremely technical, but together they determine mission-critical performance characteristics: how closely raceways wrap around balls, how smoothly and precisely outer rings spin, and how evenly load is distributed inside bearings. Too many brands feign expertise with an overblown muddle of token bearing jargon. Not Seismic. We fully committed to mastering the science, and we pooled brainpower with one of the few factories on earth geared up to get these specifications dialed tight. So Fullspin bearings roll with significantly less internal play, friction,wear, and noise; and superior speed, handling, and durability!

Extra-Tough (XT) Steel and Thicker Outer Rings

Steel specifications are quite complex, but they’re pivotal to bearing strength and durability. Fullspin XT bearing steel is as good as it gets. So raceways hold strictest curvature and finest surface finish – and bearings stay tight and fast – for far longer. Thicker, 60%-stiffer outer rings resist flexing, spin truer and faster, and keep seals from popping off on extreme impacts.

Next-Level Built-In and Classic Spacing / Alignment Systems

Accurate spacing and precise alignment are critical considerations that are too often overlooked. They bring superior paired performance of seated bearings; more consistent wheel contact and grip; more predictable slide dynamics; and longer wheel and bearing life. We’ve dialed both Built-In and Classic systems to a whole new level. Get your bearings straight with Fullspin!

Our Built-In designs (XT and LITE) feature integral half-spacers with smarter, stricter width specs. Patented extra-wide flanges on premium XT models square up inside wheels with more than double the contact area of ordinary Built-In interfaces – powering absolutely unparalleled alignment precision and stability.

Our Classic systems feature thick-walled spacers made of highest-grade bearing steel and machined with significantly smarter, stricter width and bore specs. Next-level profiled spacers (included with Ceramic XT models and available separately) have broad flanged ends that square up against matching extra-wide inner ring surfaces with up to 67% more contact area – powering unprecedented Classic alignment precision and stability.

High-End Lubricant

Light grease formulated by one of the world’s leading lubricant suppliers for peak performance under real-world skating stresses (not max free-spin time). No gimmicky additives, just the tried-and-true premium stuff embraced by top bearing engineers.

Superior Anti-Contaminant Seals and Ball Retainers

Seal’s outside lip is customized to precisely slot inside outer ring groove, while its inside lip forms a robust “Labyrinth” interface with a stepped T-groove on inner ring. Next-gen ball retainer has expanded diameter that engages an identical groove on inside of bearing – to form a unique integral barrier against dust and debris without a second seal. Streamlined construction not only repels dirt and grime more efficiently with fewer components; it also retains lubricant noticeably better than other designs – with virtually no lube “spin-out.” Keeps bearing spinning smooth and fast for longer… with less friction, wear, and noise.

No Imaginary Tech, Pseudo-Science, or Smoke-and-Mirrors
Just superior performance through genuinely advanced, no-BS engineering; highest-quality materials and components; and highest-precision manufacturing.

GO FULL SPEED WITH FULLSPIN!

The post *NEW* Fullspin Bearings just Released! appeared first on Seismic Skate.

90mm tall x 58mm wide 

• 53mm x 46mm TURBINE hub (NEW!)
• Bearing seat offset 8.6%
• 53mm running surface
• Radiused outside edge, beveled inside edge
• 11.25 oz. each
• Sold in sets of FOUR wheels

More miles per hour, distance per push, and blocks per watt!

• The world’s fastest urethane and most progressive hub-and wheel engineering bring unparalleled rebound and superior energy efficiency to a huge 90mm-diameter shape.
  
• Higher top speeds, longer push distances, and extended ESK8 battery life and riding range!
  
• Next-level weight-saving Turbine hub features bigger vent holes for more accessible e-board pulley adapter fitting.
  
• Hub structure ingeniously sculpted for highly-optimized routing of wheel rebound energy.
  
• Width, edge profiles, and bearing seat offset finely calibrated for race-style grip and more consistent wear.
  
• Half-millimeter concave running surface preloads edges, sharpens grip, enhances rebound.
  
• Surprisingly quick, smooth, and agile handling for its size, even through hard corners. In a class by itself!

Poured in DEFCON – the world’s fastest urethane!

• With a remarkable set of unique and highly-advanced properties, Seismic’s DEFCON ultra-high-rebound urethane is the fastest formula in the history of skateboard racing, bar none.
  
• Credited with virtually every significant world speed and distance record – including the official Guinness Standup mark (91.17 mph / 146.73 kph), the official Guinness Street Luge mark (101.83 mph / 163.88 kph), the official Guinness Standup Slide mark (73.34 mph / 117.35 kph), and the Long-Distance Push Mile, Marathon, and 24-Hour Ultra marks!
• Defcon’s superior energy efficiency means not just higher speeds and longer push distances, but also noticeably longer battery life and rolling range on your e-board! (If not yet available, ask your favorite e-board brands to offer pulley adapters fitted to the Turbine hub.)
  
• Available in two finely-tuned durometers, both with predictable handling and slow, consistent wear…
  – 74A Mango: Fast, smooth, grippy, and lively underfoot. An optimal balance of properties for most surface conditions.
  – 76A Mint: Ideal for smoother surfaces. Very fast roll with friendlier slide characteristics. Excellent durability.

The Turbine core – NEW!

• Integrates nearly 20 years of advanced hub R&D.
  
• 53mm tall x 46mm wide – the largest and most supportive hub ever seen in a wheel this size.
  
• Formed from 85D fiber-reinforced thermoplastic – the toughest hub material in the industry – with robust bearing lugs.
  
• Eight (8) contoured crossbeams (hollowed-out for lightness and aesthetics) combine with deep, wide “saddle” profile to create robust edge support and ironclad 3D mechanical lock with urethane.
  
• Central crossbeams act as internal “turbine blades” that continuously catch and guide Defcon’s superior rolling rebound energy with perfect balance and revolutionary efficiency.  Boosts both speed and e-board range to another level!
• Stiff saddle walls trap and return lateral wheel flex energy to supercharge rebound out of pumps, carves, and tight corners.

The post Introducing the Seismic 90mm MEGAWATT! appeared first on Seismic Skate.

Available in five (5) color-coded durometers and two (2) precision-fit heights: 0.65-inch Medium and 0.75-inch Tall. (Additional duros coming early 2023.)

Seismic’s DEFCON ultra-high-rebound urethane has a remarkable set of unique and highly-advanced properties – and now we’ve applied it to bushings! Defcon is the fastest wheel formula in the history of skateboard racing – credited with virtually every significant world distance and speed record, including the official Guinness Standup mark. (Pete Connolly, 91.17 mph / 146.73 kph – Sept. 16, 2017, at The Top Speed Challenge in Quebec, Canada.)

A major step forward in bushing performance!

• Deeper lean and truer, more fluid steering with less lateral hanger slop!
• Highly-energetic yet smooth and controlled return-to-center.
  
• Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
  
• Smoother, more linear resistance profile – Consistent feel • Advanced control

Fine-tuned dimensions for high-performance fit!

• Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
  
• Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
  
• Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
• Two precision-fit heights…
  – Medium 0.65-inch (16.5mm): Optimized fit in most modern longboard trucks.
  – Tall 0.75-inch (19mm): Optimized fit in most specialty race trucks.

Note: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.

The post Introducing Seismic Barrel Bushings in DEFCON urethane! appeared first on Seismic Skate.

• Packaged in pairs of one (1) 3-degree Riser and one (1) 7-degree Riser, with an advanced feature set never before seen in combination…
• Thin ends reduced to 0.5mm-thickness for lowest-possible profile.
• Mounting hole dimensions highly optimized for easy stacking. No more bent bolts!
• Biomimetic “honeycomb” structure maximizes support with minimal material.
• CNC-machined from tough composite with superior dimensional stability. Highly resistant to deformation from extreme loads and impacts.

How to use Angled Truck Risers (aka Wedges)

• For quicker steering response, orient the thin end of the Wedge towards the end of the deck. Usually called “wedging,” this is most commonly done with the front truck.
  
• For slower steering response, orient the thick end of the Wedge towards the end of the deck. Usually called “de-wedging,” this is most commonly done with the rear truck, especially on racing boards.

The post NEW! Seismic ANGLED TRUCK RISERS appeared first on Seismic Skate.

46mm x 44mm Fusion hub • Bearing seat offset 6.5% • 9.25 oz. each
50.5mm running surface • Radiused outside edge, beveled inside edge

Always have the wind at your back!

• Ideal size and proportions for max mileage on LDP treks and max velocity in Top Speed pursuits
• Highly optimized for rolling efficiency without compromising traction, even through hard corners and strong pumps.
• Surprisingly quick acceleration and nimble edge-to-edge response for its size. Speed and momentum to beat the pack.
• Finely-calibrated width and stout, highly-supported lip profiles.
• Bearing seat offset 6.5% for progressive lip engagement and more consistent wear.
• Running surface features a 0.5mm concave that pre-loads edges, sharpens grip, and enhances rebound.
• Used to set the new World Record for Fastest Slide. (Ambroise Trauet, 73.34 mph / 117.35 kph Toeside ? June 23, 2022, in Sellraintal, Tirolean Alps, Austria ? official Guinness certification expected in 2023.)

Poured in DEFCON ultra-high-rebound formula

• The fastest formula in the history of skateboard racing, bar none.
• Credited with virtually every significant world distance and speed record, including the official Guinness Standup mark. (Pete Connolly, 91.17 mph / 146.73 kph – Sept. 16, 2017, at The Top Speed Challenge in Quebec, Canada.)
• Defcon’s superior energy efficiency means not just higher speeds and longer push distances, but also noticeably longer battery life and rolling range on your e-board! (If they aren’t already available, ask your favorite e-board brands to offer pulley adapters fitted to the Tailwind’s Fusion hub.)
• More miles per hour, distance per push, and blocks per watt! Predictable handling; slow, consistent wear.
• Available in two finely-tuned durometers –
  76A Mango: Fast, smooth, and lively underfoot. An optimal balance of properties for most surface conditions.
79A Mint: Ideal for smoother surfaces. Very fast roll with friendly slide characteristics. Excellent durability.

The Fusion core

• Integrates 15 years of advanced hub R&D.
• 46mm tall x 44mm wide – the largest and most supportive hub ever seen in a wheel this size.
• Formed from 85D fiber-reinforced thermoplastic – the toughest hub material in the industry – with robust bearing lugs.
• Deep, wide “saddle” profile regulates lateral wheel flex and supercharges edge support.
• Eight (8) lateral support beams (hollowed-out for lightness and aesthetics) combine with saddle profile to create unprecedented 3D mechanical lock with urethane.
• Support beam contours form internal “turbine blade” structure that reflects and directs Defcon’s unparalleled energy return…
– creates uniquely-efficient and perfectly-balanced dynamic rolling rebound
– turbocharges roll and enhances e-board range

The post Introducing the Seismic 83mm Tailwind appeared first on Seismic Skate.

Big, plush, and FAST – The 76mm Hot Spot is back and ready to dominate the hills! Poured in Seismic’s exclusive Defcon ultra-high-rebound speed formula: track tested and podium approved.

The post 76mm Hot Spots are BACK appeared first on Seismic Skate.

Seismic Alpha Wheels

Skateboarding’s profile as a legit sport is undeniably on the rise. Street and Park are now included in the Olympics (with other disciplines sure to follow), and the prestigious World Skate Games started showcasing Downhill at its 2019 edition in Barcelona, Spain. After a two-year break, this elite international competition is on again in Argentina.

The U.S. members of the Seismic Team are proud to lead the talented group of Downhill racers representing America at this year’s WSG in Argentina. Notably, they own the #1 top-ranked spots on the U.S. Team in every category – Men’s & Women’s Standup Skateboard and Men’s & Women’s Street Luge!

All four U.S. Top Qualifiers rely on Seismic’s advanced Alpha competition race wheels, poured with our proprietary Defcon urethane compound. So do numerous other WSG Qualifiers from the U.S. and abroad, in both DH and Slalom racing. Defcon is the fastest formula in the history of skateboard racing, credited with virtually every significant world speed record including the official Guinness mark. Truly the Champions’ Choice!

A hearty congratulations to all of the Seismic riders from across the globe competing in the 2022 World Skate Games!

Seismic Team riders and USA #1 Qualifiers in DH and Luge: Chase Hiller, Emily Pross, Sabrina Riffenburg, and Ryan Farmer

The post Seismic Team at World Skate Games 2022! appeared first on Seismic Skate.

The urethane behind multiple world records, coupled with new wave wheel and core tech… The 80.5mm x 55mm LDP Alphas are an elite competition distance wheel capable of tackling the most demanding rides!

The post Time to fly – LDP Alphas are back in stock! appeared first on Seismic Skate.

The big, airy, fiber-reinforced hub combines with perfectly-refined proportions and superbly-supported radiused edges for a truly progressive freeride experience:
• quick acceleration
• slide release and hookup that are always easy to read
• vibrant ’thane lanes
• consistent wear

Poured in Seismic’s Premium Clear formula, in 80a Clear Blue and 82a Clear Purple.  These wheels offer a buttery-smooth slide and extreme comfort while sideways! 

The post 72mm Tantrum Is Back With New Flavors appeared first on Seismic Skate.

The 62mm Crybaby is the epitome of an easy, forgiving slide wheel.  Available in mint 80A Defcon premium race formula, crystal clear blue 82A, and red 84A and blue 88A Elixir premium slide formula!

The 69mm Hot Spot is an incredible performer for hard carving, slalom, or surf-skate. A classic shape with a progressive hub and unparalleled urethane tech!

The post Full Stock on Sliding and Carving Wheels appeared first on Seismic Skate.

Available in TWO proprietary formulas, with finely-tuned durometer choices.

Defcon: Ultra-high-rebound, thoroughbred race ‘thane • Guinness WR speed • directional slide • long-lasting grip • slow, consistent wear
• 74A Plum: (Chase Hiller pro signature wheel): Plush, velvety roll with extra edge hold, even on rough roads. Aggressive yet smooth slide with faster braking.
• 76A Mango: Vice-like grip and very snappy directional slide, with plenty of slowdown power. Ideal for aggressive racing.
• 78A Mint: Very stiff edges that give loads of grip with a friendly slide and crisp hookup. Ideal for smooth roads and lighter riders.

BlackOps: comfortable and predictable on all pavements • exceptional balance of speed and grip • extreme traction fresh • buttery and smooth sliding broken-in
• 77A Blue: Sticky and predictable “in the pavement” slide. Perfect for rough and inconsistent pavement.

The post HUGE Restock on 75.5mm ALPHA! appeared first on Seismic Skate.

The brainchild of Seismic Pro Aaron Hampshire, the Genome is a modern thoroughbred racer from tip to tip. We spared no effort in painstakingly evolving and refining the deck’s shape and contours at Seismic headquarters in Boulder, Colorado. For meticulous handcrafted manufacturing, we turned to the Rocket Longboards factory in the heart of the Swiss Alps.

A 7-ply Canadian Maple core sandwiched between two bi-axial layers of high-grade Carbon cloth makes the Genome RACE STIFF. The gradual 0.64″ (1.62 cm) elliptical concave is both comfortable and responsive. Ergonomic wheel well flares – optimized separately for the front vs. rear foot – add leverage and control.They’re milled on the underside, too, adding clearance for wheels up to 80mm tall.

A mellow W synergizes with the rear flares for an unprecedented locked-in feeling while tucking, sliding, and cornering. A 0.25″ (0.63 cm) front-loaded Rocker combines with a 5mm-deep, 2-degree flush-mount at the nose to make for an ultra-responsive deck with low ride height.

• Front-loaded Rocker with 0.64″ (1.62 cm) elliptical concave
• Ergonomic wheel well flares (milled on the underside)
• 5mm-deep, 2-degree flush-mount at the nose
• 0-degree flush-mount at the tail
• Graphic on bottom
• Not pre-gripped
• Weight 4.41 lbs. (2.0 kg)

The post Aaron Hampshire “Genome” Pro Model Deck appeared first on Seismic Skate.

Seismic’s 85mm Speed Vent

Standup Downhill – Guinness WR: 91.17MPH / 146.73KPH
Street Luge – Guinness WR: 101.83MPH / 163.88KPH
Long-Distance Push / Pump (LDP) – Records for Mile (3:23.5), Marathon (1:30:50), and 24-Hour Ultra (313.9 miles)!

• Perfect balance of properties for top speed down hills and max mileage on LDP treks.
• Huge 85mm diameter brings speed and momentum to beat the pack on all straightaways!
• Surprisingly quick, smooth, and agile handling for its size, even through hard corners.
• Edges and bearing offset designed for race-style grip; hub engineered for weight-reduction and energy return. In a class by itself!

Available in THREE proprietary formulas –
Defcon: Guinness WR speed • long-lasting grip • slow, consistent wear
BlackOps: excellent balance of speed, grip, and durability • comfortable and predictable
Premium Clear: the best beautiful clear urethane on the market • plush, fast, and grippy

The EC {Energy Conversion} Hub
• The original tall, wide hub: 57mm tall by 37mm wide
• Super-tough 85D fiber-reinforced thermoplastic
• Saves weight, adds quickness and agility of a smaller wheel.
• Unique inside-edge hollow enhances rebound.
• Robust mechanical lock with urethane

The post World’s FASTEST wheels – Ready to Break More Records! appeared first on Seismic Skate.

In the early 2000s, 3DM introduced big updates on classic 1970s race wheel shapes… and the results utterly dominated international slalom and downhill competition for many years.  Seismic took over 3DM in 2004 and added fresh spins to the 62mm Cambria, 68mm Avalon, and 75mm Avila.

Seismic is stoked to once again offer these classic wheel shapes in a rainbow of beautiful colors poured in our Premium Clear formula: the best clear urethane on the market – smooth, fast, and grippy! (White and smoke color options also available.)

The 62mm by 45mm Cambria is perfect for when you want speed and grip but don’t need to go big and burly. Used on most of the boards seen in the 2005 feature film “Lords of Dogtown.” Great for all-purpose longboarding, cruising, and Old School styling, and also one of the world’s best Tight Slalom wheels.

The 68mm by 55mm Avalon is named after a legendary slalom racing site on California’s Catalina Island. Great for all-purpose longboarding, cruising, and Old School styling, and also one of the world’s best all-around slalom wheels – in the  early and middle 2000s, the Avalon won more elite races than all other brands combined!

The 75mm by 65mm Avila, Introduced in 2002, is the original big, wide wheel, and the template for many race wheel designs that followed. Weighing more than 1/2-pound each, the Avilas excel on long courses due to their tremendous roll speed and inertia. Great for all-purpose longboarding and cruising, and among the world’s best wheels for racing disciplines including GS, DH, luge and beyond.

Action photo courtesy Christian Hosoi and StalkIt Skateboards ©2011.

The post Rock Classic Lines With a Modern Roll appeared first on Seismic Skate.

Send your carving, pumping, surf-skating, slalom, and pump-trackin’ to the next level… with the world’s biggest and best lineup of high-performance race-style wheels 70mm and under! Poured in Defcon Guinness-Record-setting speed ’thane, the Seismic Ripplers (59mm) and Hot Spots (63mm, 66mm, 69mm) are exceptionally agile, grippy, and FAST!

59mm Rippler

Micro-sized with lightning-quick speed!
Perfect for pump-track setups and smaller rides like
mini-cruisers, locker boards, filmers, and retro pool/park boards.

63mm Hot Spot

Fast, grippy, and plush!
Awesome for slalom, cruising, and surf-skate.

Seismic’s Mini-EC hubs help make the Hot Spots & Ripplers incredibly lively and fun! The unique core design saves weight, stiffens the inside edges for faster roll, and super-charges inside edge rebound for quicker turn release.

The post Compact Wheels With BIG SPEED! appeared first on Seismic Skate.

Streamlined to a single 64.5mm size, in three Defcon-formula durometers. Quick and lightweight, but with enough meat to roll smoothly and last a long time. Stone-ground running surface for silky-smooth slides right from the get-go.

Improved “halo” hub configuration for more robust mechanical lock inside urethane. Thick, unbreakable bearing supports.

The first wheel carefully designed from the inside-out for the rigors of modern Longboard Freestyle and Dance!

Available in DEFCON ultra-high-rebound formula: Guinness WR speed – more tricks per push! • slow, consistent wear • predictable handling

• 75A Bubblegum: Plush roll with extra grip. Velvety-smooth even on rough surfaces.
• 77A Mango: Fast, smooth, and lively underfoot. An optimal balance of properties for most surface conditions.
• 79A Mint: Ideal for smoother surfaces. Very fast roll with friendly slide characteristics. Excellent durability.

The post The Encore, Reimagined! appeared first on Seismic Skate.

Seismic riders Troy Fairbanks, Dre “Grizzly” Nubine, and Brandon Desjarlais make the pavement cry on the Cry Baby wheels, the newest members of the Seismic freeride wheel family. Available in 60x38mm (28mm contact patch) and 64x42mm (32mm contact patch), with centerset bearing placement. Both sizes available in red 84A and blue 88A.

The little Baby and the big Baby are both poured in Seismic Elixir, the first urethane formulated exclusively for modern freeriding. Like other wheels in the Seismic freeride lineup, the Cry Babies offer smooth, predictable slides with great hookup, grip when you need it, and awesome ‘thane lines. Baby bottle and diaper change included, but only on the graphic.

For more info or to purchase, go to:
http://www.seismicskate.com/wheels/60mm_Cry_Baby/
http://www.seismicskate.com/wheels/64mm_Cry_Baby/

The post Cry Baby – New Freeride Wheels from Seismic are here! appeared first on Seismic Skate.

Boulder, CO – After more than two years in development, Seismic is proud to unveil the patent-pending Tekton bearing – the bearing behind the Official IGSA Downhill Speed World Record. (Click here to witness the awesome feat on YouTube.)

Said 2009 World Cup Champion Mischo Erban, who set the new record of 80.83mph last fall, “Tekton bearings roll fast, hold alignment better and stay cleaner, longer. It’s that simple!”

“The difference is the wide flange at the ends of the integrated half-spacers,” said Seismic founder/owner Dan Gesmer. “The big, flat contact surfaces square up, co-align and self-stabilize inside your wheels.”

“Once coupled, the Tektons literally block themselves from sitting or rocking out of alignment, so they stay straighter than any other bearing system ever,” Gesmer added. “Your wheels roll faster with better control, while the bearings last longer and stay quieter!”

According to Neil Sload of Focus Supply, one of the world’s leading suppliers of bearings to top pro skateboard brands, “The Seismic Tekton is by far the most technical skateboard bearing I’ve ever seen produced.”

“It wasn’t easy to find a bearing factory capable of manufacturing this design,” Gesmer continued. “The integral flanged half-spacers need to be custom-machined, not just cut from a stock steel tube.”

Tektons should not be confused with bearings that have their inner races stretched on one side to form a simple half-spacer. Sometimes called “industrial” bearings, these have been used in pre-assembled skateboards since the 1970s, and more recently for racing, but they’re still vulnerable to misalignment.

The diameter of the Tektons’ flanged contact surfaces is up to 35% larger compared to bearings coupled with floating spacers, and up to 23% larger compared to bearings with stretched inner races. This translates to exponentially better correction for flaws in bearing seat levelness, bearing seat spacing, axle diameter and axle straightness.

“I have total confidence in their ability to push extreme speeds – 80mph and beyond!” said Erban.

Tekton bearings, rated at ABEC-7, are precisely dimensioned to provide superior alignment safeguards in all modern high-performance skateboard wheels. Features include steel balls, nylon retainers, black outer casing, removable rubber-coated steel seals with printed graphic, and a proprietary lubricant combining both oil and grease.

The inner race is stepped underneath the seal to resist contamination, and it’s stepped between the bearing and the flange to save weight. (A set of Tektons weighs the same as a set of conventional bearings with simple floating spacers.) On the side opposite the flange, the inner race extends 0.5mm to form a thin integrated washer.

Like all Seismic wheels, trucks, and decks, Tekton bearings are available from finer skate stores and online at www.seismicskate.com. No bearing spacers, axle washers, or World Record budgets required.

For further information, contact info@seismicskate.com. Stay tuned this year for more startling innovations in trucks, boards and wheels from Seismic!

The post Seismic introduces Tekton™ bearings appeared first on Seismic Skate.