Lokton_Group_V2_Small
lktn36pck3-1lktn36pck3-2Metal_Plate_Closeup

Lokton Griptape, 36-grit, 3-square pack

$25.00$32.00

Pack of three (3) 11×11-inch square sheets of 36-grit Lokton™ griptape.

Clear
SKU: LKTN36PCK3 Categories: , ,

Product Description

Pack of three (3) 11×11-inch square sheets of 36-grit Lokton™ griptape. Color: Midnight Blue.

Available in three lasercut hole patterns, as well as Solid for maximum surface coverage. Honeycomb, Metal-Plate, and Ninja hole patterns decrease weight by up to 40%, while hole edges increase grip.

Noticeably sharper, tougher, and grippier. Grit stays ultra-sharp, doesn’t flake off. No smearing or peeling, even in heat or rain. The best grip in the history of grip. Lock in with Lokton™!

Apply Lokton only to clean, dry deck surfaces at room temperature. For best results, follow these directions:
1) If deck is coated with excess lacquer, buff with fine sandpaper and clean off residue with Naptha.
2) Use a blow dryer or heat gun to warm up Lokton after removing release paper but before placing on deck.
3) Place on deck, then immediately apply pressure by standing on all areas of the Lokton.
4) Trim edges by cutting from the top. Do not bend or file edges, as this can cause excessive grain shedding.

Lokton does not always adhere well to the top of other grip tape, but it will conform to the contours of most concaves and implants. The Ninja lasercut conforms more easily to deeper concaves.

The PSA (pressure-sensitive adhesive) on the back of Lokton is some of the best, most heat-resistant on the market. However, it does not always bond well to unusual combinations of deck-top materials and finishes, especially certain types of Formica and heavy lacquer. Your results may vary.

 

Reviews

There are no reviews yet.

Be the first to review “Lokton Griptape, 36-grit, 3-square pack”

Your email address will not be published. Required fields are marked *

*