Sheets of 11-inch-wide Lokton^® griptape in NEW Deep Black XSG formula.
36-grit Coarse.  Available in 36-inch, 42-inch, and 48-inch lengths. Solid (no internal laser-cutting).

Noticeably sharper, tougher, and grippier. Grit stays ultra-sharp, doesn’t flake off. No smearing or peeling, even in heat or rain. The best grip in the history of grip. Lock in with Lokton!

NEW Lokton Deep Black XSG formula available exclusively in 36-grit Rolls and custom-cut strips.
• Xtra Sharp Granules for secure, confident footing in the most demanding scenarios (e.g., extreme high-speed turns, slides, and road turbulence)
• Granules not just sharper, but also tougher and GRIPPIER!
• Superior hold when g-forces (side loads) reach maximum intensity.
• Improved PSA sticks to wider range of deck surfaces and conforms better around griptape inserts.
• Thicker backing and improved resin hold granules better than ever.
• Branded backing.

Apply Lokton only to clean, dry surfaces at room temperature. For best results, follow these directions:
1) If deck is coated with excess lacquer, buff with fine sandpaper and clean off residue.
2) Remove release paper. To help Lokton conform to more extreme deck contours, first gently warm up with natural sunlight or blow dryer. (Do not over-heat with heat gun or place in an oven!)
3) Place on deck, then immediately apply pressure by standing on all areas.
4) Trim edges by cutting from top. Do not bend or file.

Lokton conforms well to the contours of most concaves and implants.

The PSA (pressure-sensitive adhesive) on the back of Lokton is some of the best, most heat-resistant on the market. However, it may not always bond well to unusual combinations of deck-top materials and finishes – especially certain types of Formica and heavy lacquer. Your results may vary.

Pack of approximately 50 laser-cut hole pieces of Lokton^® griptape in Fishnet (new!), Honeycomb, Metal-Plate, or Ninja shapes. Color: Midnight Blue.

36-grit Coarse or NEW 60-grit Medium – just as durable as the original 36-grit version, but with finer granules for easier footing adjustments and less wear-and-tear on shoes.

Noticeably sharper, tougher, and grippier. Grit stays ultra-sharp, doesn’t flake off. No smearing or peeling, even in heat or rain. The best grip in the history of grip. Lock in with Lokton!

Apply Lokton only to clean, dry surfaces at room temperature. For best results, follow these directions:
1) If deck is coated with excess lacquer, buff with fine sandpaper and clean off residue.
2) Remove release paper. To help Lokton conform to more extreme deck contours, first gently warm up with natural sunlight or blow dryer. (Do not over-heat with heat gun or place in an oven!)
3) Place on deck, then immediately apply pressure by standing on all areas.
4) Trim edges by cutting from top. Do not bend or file.

Lokton conforms well to the contours of most concaves and implants. The Ninja Star pattern conforms more easily to deeper concaves.

The PSA (pressure-sensitive adhesive) on the back of Lokton is some of the best, most heat-resistant on the market. However, it does not always bond well to unusual combinations of deck-top materials and finishes – especially certain types of Formica and heavy lacquer. Your results may vary.

40×11-inch sheet of Lokton^® griptape with continuous laser-cut hole pattern. Color: Midnight Blue.

36-grit Coarse or NEW 60-grit Medium – just as durable as the original 36-grit version, but with finer granules for easier footing adjustments and less wear-and-tear on shoes.

Available in Fishnet (new!), Honeycomb, Metal-Plate, and Ninja Star laser-cut patterns. Hole patterns decrease weight by up to 40%, while hole edges increase grip.

Noticeably sharper, tougher, and grippier. Grit stays ultra-sharp, doesn’t flake off. No smearing or peeling, even in heat or rain. The best grip in the history of grip. Lock in with Lokton!

Apply Lokton only to clean, dry surfaces at room temperature. For best results, follow these directions:
1) If deck is coated with excess lacquer, buff with fine sandpaper and clean off residue.
2) Remove release paper. To help Lokton conform to more extreme deck contours, first gently warm up with natural sunlight or blow dryer. (Do not over-heat with heat gun or place in an oven!)
3) Place on deck, then immediately apply pressure by standing on all areas.
4) Trim edges by cutting from top. Do not bend or file.

Lokton conforms well to the contours of most concaves and implants. The Ninja Star pattern conforms more easily to deeper concaves.

The PSA (pressure-sensitive adhesive) on the back of Lokton is some of the best, most heat-resistant on the market. However, it does not always bond well to unusual combinations of deck-top materials and finishes – especially certain types of Formica and heavy lacquer. Your results may vary.

60-foot x 11-inch roll of Lokton^® griptape.

Available in:
• 36-grit Coarse in NEW Deep Black XSG formula.
• 60-grit Medium in Midnight Blue Classic formula. Just as durable as the original 36-grit version, but with finer granules for easier footing adjustments and less wear-and-tear on shoes.

Noticeably sharper, tougher, and grippier. Grit stays ultra-sharp, doesn’t flake off. No smearing or peeling, even in heat or rain. The best grip in the history of grip. Lock in with Lokton!

NEW Lokton Deep Black XSG formula available exclusively in 36-grit Rolls and custom-cut strips.
• Xtra Sharp Granules for secure, confident footing in the most demanding scenarios (e.g., extreme high-speed turns, slides, and road turbulence)
• Granules not just sharper, but also tougher and GRIPPIER!
• Superior hold when g-forces (side loads) reach maximum intensity.
• Improved PSA sticks to wider range of deck surfaces and conforms better around griptape inserts.
• Thicker backing and improved resin hold granules better than ever.
• Branded backing.

Apply Lokton only to clean, dry surfaces at room temperature. For best results, follow these directions:
1) If deck is coated with excess lacquer, buff with fine sandpaper and clean off residue.
2) Remove release paper. To help Lokton conform to more extreme deck contours, first gently warm up with natural sunlight or blow dryer. (Do not over-heat with heat gun or place in an oven!)
3) Place on deck, then immediately apply pressure by standing on all areas.
4) Trim edges by cutting from top. Do not bend or file.

Lokton conforms well to the contours of most concaves and implants.

The PSA (pressure-sensitive adhesive) on the back of Lokton is some of the best, most heat-resistant on the market. However, it does not always bond well to unusual combinations of deck-top materials and finishes – especially certain types of Formica and heavy lacquer. Your results may vary.

Pack of three (3) 11×11-inch square sheets of Lokton^® griptape. Color: Midnight Blue.

36-grit Coarse or 60-grit Medium – Just as durable as the original 36-grit version, but with finer granules for easier footing adjustments and less wear-and-tear on shoes.

Available in four (4) laser-cut patterns, as well as Solid for maximum surface coverage. Fishnet, Honeycomb, Metal-Plate, and Ninja Star hole patterns decrease weight by up to 40%, while hole edges increase grip.

Noticeably sharper, tougher, and grippier. Grit stays ultra-sharp, doesn’t flake off. No smearing or peeling, even in heat or rain. The best grip in the history of grip. Lock in with Lokton!

Apply Lokton only to clean, dry surfaces at room temperature. For best results, follow these directions:
1) If deck is coated with excess lacquer, buff with fine sandpaper and clean off residue.
2) Remove release paper. To help Lokton conform to more extreme deck contours, first gently warm up with natural sunlight or blow dryer. (Do not over-heat with heat gun or place in an oven!)
3) Place on deck, then immediately apply pressure by standing on all areas.
4) Trim edges by cutting from top. Do not bend or file.

Lokton conforms well to the contours of most concaves and implants. The Ninja Star pattern conforms more easily to deeper concaves.

The PSA (pressure-sensitive adhesive) on the back of Lokton is some of the best, most heat-resistant on the market. However, it does not always bond well to unusual combinations of deck-top materials and finishes – especially certain types of Formica and heavy lacquer. Your results may vary.